Spring Commissioning for Oriane
Highlighted tasks are completed
| First Tasks |
| Cover off |
| Batteries hooked up and charged |
| Interior cleaned and straightened up |
| get rid of mold & absorbant stuff |
| Dodger and bimini installed |
| Solar panel hooked up |
| Engine commissioned |
| tape waterline |
| Bottom paint |
| New zincs installed |
| Interior teak oiled |
| cushions off and delivered to cleaner |
| get cockpit cushions |
| Clean under galley sink |
| Clean bilge – inspect hoses and pump |
| Hull waxed |
| Hot water heat exchanger valves |
| clear tank vents |
| Water system flushed and filled |
| Before Launch |
| Distance log reset to zero |
| Check safety gear - update as necessary |
| Documentation on board |
| Post launch |
| Personal gear onboard - PFD, Foulies, etc |
| get sails & bent-on |
| Zinc in Heat Exchanger 9/16” nut |
| Deck cleaned |
| As possible |
| Re-bed deck fittings |
| Service winches |
| Clean cockpit lockers and rearrange gear |
| horn for hailer |
| Replace nav lights with LED’s |
| Replace Deck lights with LED’s |
| Redo teak deck |